Skip to content


Sold out
SKU nu12000dsp

The Behringer iNUKE NU12000DSP 12000W Power Amplifier with DSP and USB Interface utilizes high-density Class-D technology and efficient switch-mode power supplies to deliver 12000W of peak power. Specifically the amplifier is rated at 2 x 6000W at 2Ω, 2 x 3400W at 4Ω, 2 x 1700W at 8Ω, and weighs less than 26.5 lb (12.0kg).

The amplifier is equipped with a 24-bit 96 kHz analog-to-digital and digital-to-analog converter DSP. The DSP is used for delay aligning speakers that are separated by a distance, three different filter types of crossover (up to 48 dB/octave), eight parametric EQs, two dynamic EQs, and dynamic signal processing. All of these settings can be adjusted using the unit's front-panel LCD display, recalled using the built-in preset memory, and can be locked using the amplifier's security settings. The amplifier can also be setup and controlled via the front-panel USB connector. Remote control software is available for download from

The high-efficiency circuit design runs cool and does not require the massive heat sinks and heavy toroid transformers of some other amplifier designs. The front panel features positive-detent controls and LED indicator lights for showing when a signal is present or clipping and needs to be reduced.

The rear panel features combo XLR and 1/4" TRS input connectors making the amplifier compatible with a wide variety of different sources, balanced or unbalanced. Professional twist-lock Speakon connectors are provided to ensure a reliable and efficient transfer of power to your loudspeakers.

The rear panel also has switches that enable the amplifier to work in Dual Mono, Stereo, or Mono Bridge mode. A built-in crossover switch enables the amplifier to operate in either full-range or biamp mode sending low-frequency content to passive subwoofers.

Power Output
Delivers 2 x 6000W at 2Ω, 2 x 3400W at 4Ω, 2 x 1700W at 8Ω
Amplifier Design
Features Class-D amplifier technology with near-zero thermal buildup
Provides delay, eight parametric EQs, two dynamic EQs, and dynamic signal processing with 24-bit 96 kHz resolution
Security Codes
Locks DSP settings using user selectable codes
Preset Memory
Allows user to save DSP settings for future recall
USB Interface
Enables control of DSP via front-panel USB connection
Power Supply
Utilizes efficient switch-mode power supply for noise-free audio, enhanced transient response, and low power consumption
Incorporates zero-attack limiters to protect output level with reliable overload protection
Includes built-in subwoofer crossover for dedicated subwoofer operation
Features detented and illuminated gain controls for precise level setting
LED Indicators
Precise 4-segment signal and limit LEDs to monitor performance
Features XLR & 1/4" TRS input connectors for compatibility with a variety of different sources
Utilizes professional twist-lock speaker connectors for reliable connections
Protection Circuitry
Includes independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the system