Skip to content

AMERICAN DJ SWEEPER BEAM LED

by ADJ
$534.00
SKU Sweeper Beam LED

The American DJ Sweeper Beam LED is an intelligent, multiLED scanner. The Sweeper Beam LED can operate as a standalone fixture or in a Master/Slave configuration. It creates exciting lighting effects with its quick sweeping beams and 8-zone chasing, pulsing, and strobing LEDs. It features eight 8W bright, LEDs with a narrow 3.4° beam angle, 4 DMX channel modes, and a 4-channel LED DMX menu.

The Sweeper Beam LED has three operating modes: sound active mode, show mode, and DMX control. In each mode you can run the fixture as a standalone fixture or in a master/slave configuration. This fixture is suitable for theaters, studios, retail stores, and other similar locations.

The Sweeper Beam LED contains an automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch, there is no need to worry about the correct power voltage and the unit can be plugged in almost anywhere.

Note: For best results use fog or special effects smoke to enhance the beams projections. This may cause severe eye damage if looking directly into the light source.

Quick sweeping narrow beams combined with an 8-zone LED chase 8 x 3W white Cree LEDs
4-button DMX LED display
Digital display for address and function setting
DMX-512 protocol
4 DMX channel modes (1, 6, & 11-channel modes)
3 Operational Modes: DMX Control, Show Mode, & Sound Active
DMX Control Mode: This function will allow you to control each of the fixture's traits with a standard DMX-512 controller (sold separately) such as the Elation Show Designer
Includes exciting sound activated built-in programs
LED pulse & strobe effect
Internal microphone
270° tilt via smooth stepper motors
Long life LED (50,000-hour rated)
Runs very cool with no duty cycle
Includes mounting brackets to mount on a wall or set on the ground
Safety hook on rear panel
Very low power consumption; connect more units in a single circuit
IEC AC IN/OUT on rear to daisy chain power (up to 8 Sweeper Beam LED's @ 120V and 14 Sweeper Beam Quad LEDs @ 230V)
Compatible with ADJ UC3 Series easy-to-use controllers (sold separately)
Multi-voltage operation: 100 to 240 VAC, 50/60 Hz, IEC socket